Chimney repair in Rocklin CA - solid brick and tight joints that keep the rain out
Crumbling mortar, loose brick or a damp stain by the fireplace? We find the cause and fix it so the chimney stands sound again.
- Licensed and insured.
- Free on-site estimates.
- We reply within 1 business day.
The chimney repair work we do
Repointing worn joints
We cut out mortar that's gone soft, sandy or recessed and pack in fresh, which suits a chimney whose bricks are solid but whose joints are wearing away.
Partial chimney rebuilds
When bricks are too far gone for new mortar to save, we take the top of the chimney down to good brick and lay it back up straight and tight.
Flue liners
A new liner gives smoke and heat a sound path up through the brick, and it suits a flue that's cracked, crumbling or was never lined at all.
What does chimney repair in Rocklin usually involve?
Chimney repair in Rocklin, CA fixes the mortar, brick and flue liner that keep rain out of your house and smoke inside the chimney, and most jobs start with repointing, which is cutting out worn mortar and packing in fresh.
Usually it starts with something you notice, like sandy mortar on the hearth, a water stain on the ceiling beside the chimney or a brick up top that's working loose. The price turns on how far the damage goes, from worn joints to cracked brick to a top that has to come down, plus whether the flue needs a liner and how high and steep your roof is. The schedule rides on the same things, on the weather, since fresh mortar doesn't like rain, and on whether the city wants a permit, and your written estimate spells out what we'd do and why. The state licensing board's masonry license covers brick, natural and manufactured stone, and fire brick for refractory work, the heat-proof lining inside a firebox, which is the work a chimney calls for.
Chimney repair, from the crown to your hearth
I get up close to see whether your chimney needs new mortar, a liner or a partial rebuild, and I show you photos of what I found so we're looking at the same thing.
Protect the room first
Before any dusty work starts, we cover the floor and furniture near the fireplace, because soot and mortar dust drift farther than you'd think.
Mortar and brick
Worn joints get cut out and refilled, same as our tuckpointing, and cracked or flaking bricks get replaced the way we handle brick repair.
Crown and flashing
We seal the crown and check the flashing, the metal where roof meets brick, since both are easy places for water to get in.
A liner where needed
If the flue liner is cracked or missing, we fit one that suits your chimney's shape and condition, and I'll explain why.
Why Rocklin calls us for chimneys and brick
I grew up on a farm where anything that broke got fixed at home, and I still fix the cause instead of patching what shows. If your chimney can wait, I'll say so. Call (916) 666-6314 and I'll come take a look.
I come out and look myself
I come to your house to look the chimney over in person, and the same small crew I work beside does the repair, so nothing gets lost between the visit and the work.
Five years of brick and stone
I started this business in 2021 after learning the trade beside other masons, and most of our calls since have been crumbling joints, tired chimneys and walls people want built right.
Licensed and insured, questions welcome
We're licensed and insured, and before you sign I'll answer every question about the estimate, because I want you to know exactly what you're paying for.
What happens after you call about your chimney?
We plan chimney work around you and your house, and nothing gets started until you've seen what I found and told us to go ahead.
or call (916) 666-6314
Call or send a message
Call (916) 666-6314 or send us a message through the form, and we'll get back to you to set a time that works.
I look it over
I come out, get up close to the chimney inside and up top, and answer whatever you want to ask, however small it seems.
Your written estimate
I leave a written estimate in plain words. Once you say go, the crew and I do the work, keep you posted and walk the job with you.
Get a chimney and masonry estimate in Rocklin
Note any cracks, leaks, loose brick or liner you know of, and we'll reply within one business day to set up a free on-site estimate, no obligation. Call (916) 666-6314, weekdays 6 AM to 9 PM, weekends 8 AM to 10 PM.
Chimney repair questions we hear
How much does chimney repair cost near Rocklin?
Chimney repair in the Sacramento area usually costs about $600 to $8,000 per project. Fresh mortar in a few worn joints sits toward the low end, and rebuilding the top with a new liner sits toward the high end. Your own figure comes on the written estimate I leave after looking it over.
When does a chimney need a rebuild instead of repointing?
A chimney needs a partial rebuild once the damage goes past the mortar into the bricks, which one contractor pricing guide describes as spalling, cracking or leaning brick. Spalling is the face of a brick flaking off. The guide says that means taking the chimney down to sound brick, typically to the roofline, and laying it back up with new or salvaged brick, while solid bricks with worn joints usually just need repointing.
Which chimney liner is best for my chimney?
A stainless steel flexible liner is the one that goes in without tearing into the chimney, since it threads down the flue, according to that same guide. Clay tile is practical only during a rebuild, and a cast-in-place liner forms a seamless insulated flue that suits odd-shaped or damaged chimneys. I'll tell you which fits yours once I've seen inside the flue.
How long does chimney repointing last?
The same pricing guide says most chimneys need repointing every 25 to 50 years. Where yours falls depends on the mortar, how much weather the chimney takes and how well it was built, so its age alone won't tell you, and a close look will.
Where do I get a permit for chimney work in Rocklin?
The City of Rocklin Permit Center takes project submittals and issues the permits a job requires. If you're applying yourself as an owner builder, you do it through an eTRAKiT Public Account with the city.
How do I know which chimney inspection I need?
Under the national chimney standard, a Level 1 inspection is the yearly look at the parts of a chimney you can readily reach, and the other two levels are for specific situations. A Level 2 adds a camera scan and the attic, roof and crawl spaces when something changes or the house is sold. A Level 3 opens up hidden areas only when a serious problem is suspected, so if someone recommends one, ask what problem they suspect.
Other masonry work you might need
Tuckpointing
If the walls of your house show the same sandy, recessed mortar as the chimney, tuckpointing renews those joints before water starts working into the brick behind them.
Explore TuckpointingBrick repair
Cracked, chipped or loose bricks on a wall, steps or planter can usually be cut out and replaced with a close match while the rest stays put.
Explore Brick repairFireplace installation
When the firebox inside is beyond saving, or you want a fireplace where there isn't one, a new installation starts fresh with fire brick built for the heat.
Explore Fireplace installation
Chimney repair permits and conditions in Rocklin
Whether your chimney repair needs a permit is the city's call, and Permit Center staff can answer most project questions and schedule inspections, so it's one office for all of it. You can reach them at 916-625-5120 or at 3970 Rocklin Road, 1st Floor, Monday through Friday, 8 am to 4 pm. When a job needs a permit, we find out which office covers your address and handle the paperwork with them, and the city asks contractors working there to hold a valid Rocklin business license and a Rocklin eTRAKiT account, since accounts set up elsewhere won't work there.
Hot, dry summers bake a chimney's crown and the winter rains find whatever cracks they leave, so on chimneys here we look hardest at the top. We see the same wear on jobs in Roseville and Granite Bay.