Prestige Rocklin Concrete and Masonry

Masonry contractor in Loomis, CA - brick and stone repair that fixes the cause

Prestige Rocklin Concrete and Masonry is a masonry contractor based in Rocklin that works in Loomis, repairing brick and stone, rebuilding tired chimneys and building retaining walls, walkways and block walls for Loomis homes.

Covered patio with a stone fireplace and counters, wood-beamed ceiling, and dining table beside a pool.
  • Licensed and insured.
  • Free on-site estimates.
  • We reply within 1 business day.

Masonry work for Loomis homes and lots

Loomis is right next door to us in Rocklin, and it still has the kind of room I grew up with. On our jobs here we see bigger lots with old oaks, older farmhouses beside newer homes, brick porches and chimneys that have taken decades of sun, and long driveways and paths running out to a shop or barn. The calls look a lot like the ones we get on the road up to Auburn and over in Granite Bay, just with more ground between the houses.

What moves the price here is access for our crew and materials, how much old work has to come out, and whether the cause runs deeper than what shows. The schedule usually waits on any permit and on the weather, and your own figure comes from the estimate at your place. On a sloped lot under old oaks, where the trees stand and where the water runs decide the plan before the first brick goes down.

What we build and fix in Loomis

What older Loomis homes and big lots need

I come out to look at your job myself, and the same small crew I work beside does the work. I'd rather fix the cause than patch what shows, and I'll tell you plainly when something can wait.

  • Know what you're paying for first

    I'll show you what's failing and why, and walk you through the estimate line by line, because you should understand what you're paying for before you sign anything.

  • Fixes that start with the cause

    Cracked joints and leaning walls on older Loomis homes usually trace back to water, so we stop it first. Patching over it is like painting a leaky barn roof.

  • A straight answer on what can wait

    If your chimney or wall has a few good years left, I'll say so, because I'd rather earn your call later than sell you a job you don't need yet.

Backyard pool patio with stone retaining walls, broad steps, and a large shade umbrella.

Get a free on-site masonry estimate in Loomis

Tell us your Loomis address and what's going on with the brick, stone or wall. We reply within one business day, and I come out myself to look at it, with a free estimate and no obligation.

Loomis masonry questions we hear

How do I find out if my masonry project in Loomis needs a permit?

The Town of Loomis issues building permits, so it's the office to ask, at (916) 652-1840 or through its building permit page. Its note on garages and sheds says a building of any size with electric or plumbing needs a permit, and the zoning setbacks still apply to small buildings that don't. When your job needs a permit, we confirm the Town covers your address and handle the paperwork with them.

What licenses does a contractor need to work in Loomis, CA?

A contractor working in Loomis needs an active business license from the Town, and usually a state contractor's license from the Contractors State License Board too. The board requires one when the work needs a building permit, uses employees, or totals $1,000 or more in labor and materials on a project, and the Town won't process a permit for a contractor without its business license and good standing with the board. We're licensed and insured, and it's fair to ask any contractor you're weighing about both.

What is the best way to build a wall or walkway near an oak tree in Loomis?

Plan the digging around the tree first, because the Town requires a Tree Permit before grading, paving or other ground disturbance that covers more than 20 percent of a protected tree's protected zone. Protected trees include native oaks six inches or more across, measured 54 inches above the ground, and moving or removing one takes a Tree Permit too, though some existing trees on certain residential parcels are exempt depending on the zoning. We measure the oak and lay out the footing at the estimate, so the plan fits the tree before anyone digs.

What fire hazard zones does Loomis have, and do they affect my project?

Loomis has Moderate and High Fire Hazard Severity Zones, which are mapped wildfire hazard areas, and no Very High zones. The Town's fire zone page says the wildland urban interface codes apply to new buildings in High zones and call for ignition-resistant construction on remodel projects. If your home sits in a High zone, ask the building department which codes apply before we draw anything up.

Does Loomis have earthquake rules for brick and block walls?

Yes, the Town places buildings and structures in Seismic Design Category D, an earthquake design class, unless an analysis justifies otherwise. Homes built under the state's residential code, and simple low-rise wood-framed buildings, are allowed Category C. That class shapes how a masonry wall or chimney has to be reinforced, so we sort out which one your project falls under before we price the steel.

How much does masonry work cost in Loomis, CA?

Size and material set most of the price, along with the access and tear-out that come with any job here. Block usually costs less than brick, and natural stone usually costs the most because each piece gets fit by hand, so for a long property-line wall I'd pick block. Work near a protected oak or a job that needs a permit can add time and cost, so call (916) 666-6314 and I'll come look and give you your own figure.

Don't see your city? Just ask

We work in the cities around Rocklin, including any listed here. If yours isn't one of them, call (916) 666-6314 and just ask.