Masonry contractor in Roseville, CA - brick and stone repair that fixes the cause
Prestige Rocklin Concrete and Masonry is a masonry contractor based in Rocklin that repairs brick, stone and block in Roseville and builds walls, walkways, paver driveways and fireplaces for homes across the city.
- Licensed and insured.
- Free on-site estimates.
- We reply within 1 business day.
Masonry work for Roseville homes
Roseville sits right next door to us in Rocklin, and our jobs there run from older homes around downtown to the newer neighborhoods farther out. The older streets give us tired brick, soft joints and chimneys that have done their time. The newer ones lean toward veneer, pavers and block walls between yards, much like what we see in Granite Bay.
Price here mostly follows how far the damage runs once it's opened up and how much work it takes to match the old brick. The schedule turns on whether the city wants a permit first, and I'll tell you that when I come out to look. The houses decide most of the rest, so on an older brick home we start by finding out why the joints failed. On a newer lot the job is more about building the wall or walk right the first time, so nobody has to come back and do it twice.
Masonry services for Roseville homes
Foundation repair
Cracks in a Roseville foundation get traced to their cause before we repair anything, so the fix matches what actually moved.
Explore Foundation repairChimney repair
Brick chimneys on Roseville's older homes lose mortar and crowns over the years, and we rebuild what's loose before it lets water inside.
Explore Chimney repairTuckpointing
On older Roseville brick, we grind out worn joints and tuckpoint them with mortar matched to the old, so the wall reads as one.
Explore TuckpointingBrick repair
A brick that's flaking or cracked on a Roseville porch, step or planter gets cut out and replaced with a match, not smeared over.
Explore Brick repairDriveway pavers
Cracked concrete driveways are common on Roseville's older streets. Pavers on a packed base make a surface we can lift and reset.
Explore Driveway paversRetaining wall construction
Where a Roseville yard steps down, we build retaining walls with drainage behind them, because water is what pushes most walls over.
Explore Retaining wall constructionMasonry restoration
When a Roseville brick or stone front is tired all over, we clean, repoint and repair it together rather than piece by piece.
Explore Masonry restorationFireplace installation
A family room in one of the newer neighborhoods can take a masonry fireplace, and we size it to the room and its chimney.
Explore Fireplace installationStone veneer installation
Stone veneer dresses up the stucco base of a Roseville house or a column by the entry, set on a backing that sheds water.
Explore Stone veneer installationConcrete block walls
Block walls between yards on Roseville's newer streets go up on a footing sized for the wall, with steel and grout where they belong.
Explore Concrete block wallsFoundation block wall installation
For an addition on a Roseville house, we lay foundation block on a solid footing so the new rooms have something to stand on.
Explore Foundation block wall installationOutdoor kitchen masonry
Backyards here get used, so we build outdoor kitchens in block, brick or stone, with counters and a grill surround made to live outside.
Explore Outdoor kitchen masonryWalkway construction
A Roseville front walk that's heaved or holds puddles gets dug out, rebuilt on a packed base and finished in brick, stone or pavers.
Explore Walkway constructionBrick wall installation
We build new brick garden and entry walls to match an older Roseville home, down to the brick size and joint color.
Explore Brick wall installationStone masonry
Stone steps, planters and garden walls suit a Roseville backyard, and we set each stone so it sits firm before the next goes on.
Explore Stone masonryBrick pointing
When only a few joints on a Roseville chimney or wall have gone soft, brick pointing fills them fresh without redoing the whole face.
Explore Brick pointing
What winter water in Roseville asks of masonry
I come out to look at your job myself, and the same small crew I work beside does the work. I'd rather fix what's causing the damage than patch what you can see, and I'll tell you plainly when a job can wait.
Where the water goes, found first
Parts of Roseville can flood any winter, so on walls, steps and foundations near the creeks we find where the water runs before we fix the masonry it's wearing out.
You understand the price before signing
I walk you through each part of the job and why it's there, and no question is too small to ask while we're standing in the driveway.
Repairs matched to the old brick
We're best known for careful brick and stone repair, so we match mortar color and brick size to what your house already has instead of leaving a patch that shows.
Get a free on-site masonry estimate in Roseville
Tell us what you're seeing and where in Roseville the house is, and we'll reply within one business day to set a time. I'll come out to look myself, and the estimate is free with no obligation.
Questions we hear in Roseville
How do I find out if my masonry job needs a building permit in Roseville?
Ask the city's Development Services Department, because the City of Roseville wants a permit before anyone builds, alters or repairs a structure the building code covers, and only some jobs are exempt. When your job does need one, we find out which city or county office covers your address and handle the paperwork with them.
Who has to get the building permit in Roseville, the homeowner or the contractor?
You're responsible for making sure every permit your job needs gets pulled, even though a contractor often gets it for you. The city issues permits to the legal owner of the property or to a licensed contractor, and starting work before the permit is in hand can bring a fee from the building official on top of the regular permit fees.
When does a masonry contractor need a California license for a job in Roseville?
A contractor needs a license from California's Contractors State License Board whenever the job requires a building permit, uses employee labor, or the contracts add up to $1,000 or more with labor and materials counted together. The license has to be in place before the contractor bids, not after you've agreed on the work, and we're licensed and insured.
Does a contractor from Rocklin need a Roseville business license to work at my house?
Yes, the city requires its own business license for any business working inside Roseville, including contractors based outside city limits. A Placer County business license isn't needed for work done only within Roseville, so the city license is the one to ask about.
How do I get approval for masonry work where my Roseville driveway meets the street?
Any work that reaches into the public right-of-way, the public land along the street, needs an encroachment permit from the city before construction starts. Work that stays wholly on your own property doesn't fall under that rule, so if your driveway apron or walkway runs out to the sidewalk, we sort out which part is which before we dig.
What affects the cost of masonry repair in Roseville?
The biggest things are how far the damage runs once the old mortar or brick comes out and how hard it is to match the brick, stone and mortar your house already has. Height and access matter too, since a chimney needs staging that a garden wall doesn't, and a permit adds its own fees. I'd rather tell you a repair can wait than sell you one you don't need, and your own number comes from looking at the job in person.
Don't see your city? Call us
If your city is listed below, pick it to see what we do there. If it isn't, call (916) 666-6314 and ask, since we work in the cities around Rocklin.